1994 Kia Sephia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Kia Sephia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 Sephia — Year-Specific Fitment Context
The 1994 model year marks the beginning of the Kia Sephia's 4x100 bolt pattern era, which continued through 2001 (8 consecutive years). Wheels from any 1994–2001 Kia Sephia are cross-compatible with the 1994 model.
Kia Sephia Bolt Pattern by Year
The table below shows how the Sephia's wheel specifications have changed over the years. The 1994 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 1994 Kia Sephia
For your 1994 Kia Sephia, the bolt pattern is 4x100 with a center bore of 56.1mm. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore precisely; otherwise, vibrations may occur. The factory offset is 46mm; deviations beyond ±5mm can cause rubbing or clearance issues. Always verify lug nut thread pitch: M12x1.5. Use conical (60-degree) or ball-seat lug nuts as specified by the wheel manufacturer. Improper seating can lead to wheel loosening. Wheels from 1994–2001 Sephia models are direct fit.
Historical Fitment Data Reference
In our dataset, Kia Sephia appears from 1994 to 2001 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub rings; the 56.1mm bore is critical for centering.
- ✅ Check for brake caliper clearance when using wheels with offset below 41mm or above 51mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Kia Sephia — Frequently Asked Questions
What is the bolt pattern for a 1994 Kia Sephia?
The 1994 Kia Sephia uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 46mm.
What other years of Kia Sephia have the same bolt pattern as the 1994?
The Kia Sephia uses the 4x100 pattern from 1994 through 2001. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
Can I use spacers on my 1994 Kia Sephia?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the factory wheel offset for a 1994 Kia Sephia?
The OEM offset for the 1994 Sephia is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 1994 Kia Sephia?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 1994 Kia Sephia use?
The 1994 Kia Sephia uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset