1997 Kia Sephia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Kia Sephia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1997 Sephia — Year-Specific Fitment Context
The 1997 Kia Sephia is in year 4 of 8 using the 4x100 pattern (1994–2001). Wheels from any 1994–2001 Kia Sephia are cross-compatible with the 1997 model.
Kia Sephia Bolt Pattern by Year
The table below shows how the Sephia's wheel specifications have changed over the years. The 1997 model year is highlighted.
Fitment Notes
The 1997 Kia Sephia has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Kia Sephia appears from 1994 to 2001 (8 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
1997 Kia Sephia — Frequently Asked Questions
What is the bolt pattern for a 1997 Kia Sephia?
The 1997 Kia Sephia uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 46mm.
What other years of Kia Sephia have the same bolt pattern as the 1997?
The Kia Sephia uses the 4x100 pattern from 1994 through 2001. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1997 Kia?
The 1997 Sephia uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 1997 Kia Sephia?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1997 Sephia, the PCD is 4x100.
Can I put aftermarket wheels on my 1997 Kia Sephia?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 46mm, and a center bore of at least 56.1mm (using hub rings if larger).
Do 1997 Kia Sephias use lug bolts or lug nuts?
The 1997 Sephia requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Kia Sephia is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1994-2001 (8 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1997 Kia Sephia, please report it via our About page contact so we can verify and update this record.