1996 Kia Sephia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Kia Sephia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1996 Sephia — Year-Specific Fitment Context
The 1996 Kia Sephia is in year 3 of 8 using the 4x100 pattern (1994–2001). Wheels from any 1994–2001 Kia Sephia are cross-compatible with the 1996 model.
Kia Sephia Bolt Pattern by Year
The table below shows how the Sephia's wheel specifications have changed over the years. The 1996 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 1996 Kia Sephia
For your 1996 Kia Sephia, the bolt pattern is 4x100 with a center bore of 56.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (56.1mm to 73.1mm or your wheel's bore) are essential to prevent vibration and ensure proper load distribution. The factory offset is 46mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a conical (60-degree) seat, but aftermarket wheels may require ball or flat seats. Mismatched lug nuts can cause wheel loosening or damage. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Kia Sephia appears from 1994 to 2001 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 65-80 ft-lbs after 50 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check brake caliper clearance when using wheels with lower offset (e.g., 35mm) to prevent rubbing.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Kia Sephia — Frequently Asked Questions
What is the bolt pattern for a 1996 Kia Sephia?
The 1996 Kia Sephia uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 46mm.
What other years of Kia Sephia have the same bolt pattern as the 1996?
The Kia Sephia uses the 4x100 pattern from 1994 through 2001. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
Do 1996 Kia Sephias use lug bolts or lug nuts?
The 1996 Sephia requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 56.1mm center bore important for the 1996 Sephia?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 1996 Kia Sephia?
The OEM offset for the 1996 Sephia is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 1996 Kia Sephia?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1996 Sephia, the PCD is 4x100.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset