2019 MAZDA CX-5 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 MAZDA CX-5, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 CX-5 — Year-Specific Fitment Context
The 2019 MAZDA CX-5 is in year 7 of 12 using the 5x114.3 pattern (2013–2024). Wheels from any 2013–2024 MAZDA CX-5 are cross-compatible with the 2019 model.
MAZDA CX-5 Bolt Pattern by Year
The table below shows how the CX-5's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2013 | 5x114.3 | 67.1 | 50 |
| 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 5x114.3 | 67.1 | 50 |
| 2018 | 5x114.3 | 67.1 | 50 |
| ▸ 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
| 2022 | 5x114.3 | 67.1 | 45-50 |
| 2023 | 5x114.3 | 67.1 | 45-50 |
| 2024 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 MAZDA CX-5
For your 2019 MAZDA CX-5, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 45-50mm; deviating can cause rubbing or clearance issues with brakes and suspension. Always use lug nuts with the correct 12x1.5 thread pitch and proper seat type (conical/60-degree taper for most aftermarket wheels). Avoid ball-seat lug nuts unless your wheels specifically require them. Failure to match these specs compromises safety and drivability.
Historical Fitment Data Reference
In our dataset, MAZDA CX-5 appears from 2013 to 2024 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Verify wheel clearance with the brake caliper and strut before final installation.
- ✅ If using aftermarket wheels, confirm they are hub-centric or use centering rings to match the 67.1mm bore.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 MAZDA CX-5 — Frequently Asked Questions
What is the bolt pattern for a 2019 MAZDA CX-5?
The 2019 MAZDA CX-5 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA CX-5 have the same bolt pattern as the 2019?
The MAZDA CX-5 uses the 5x114.3 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Can I use spacers on my 2019 MAZDA CX-5?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How do I measure the bolt pattern on my 2019 MAZDA?
The 2019 CX-5 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2019 MAZDA CX-5?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 CX-5, the PCD is 5x114.3.
Will wheels from another MAZDA fit my 2019 CX-5?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset