2014 MAZDA CX-5 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 MAZDA CX-5 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 50, and utilizes N 12x1.50 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2014 MAZDA CX-5 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 50 |
| Thread Size (Lug Nut / Bolt) | N 12x1.50 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 CX-5 — Year-Specific Fitment Context
The 2014 MAZDA CX-5 is in year 2 of 13 using the 5x114.3 pattern (2013–2025). Wheels from any 2013–2025 MAZDA CX-5 are cross-compatible with the 2014 model.
MAZDA CX-5 Bolt Pattern by Year
The table below shows how the CX-5's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2013 | 5x114.3 | 67.1 | 50 |
| ▸ 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 5x114.3 | 67.1 | 50 |
| 2018 | 5x114.3 | 67.1 | 50 |
| 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
| 2022 | 5x114.3 | 67.1 | 45-50 |
| 2023 | 5x114.3 | 67.1 | 45-50 |
| 2024 | 5x114.3 | 67.1 | 45-50 |
| 2025 | 5x114.3 | 67.1 | 35-45 |
2014 MAZDA CX-5 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2014 MAZDA CX-5, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2023 VinFast VF 8 | 67.1 mm (Exact) | 35-45mm | M14x1.5 (Flat) |
| 2023 VinFast VF 9 | 67.1 mm (Exact) | 35-45mm | M14x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1992 Acura NSX | 70.1 mm | 70.1mm → 67.1mm |
40 |
| 2017 Aston Martin DB11 | 68.1 mm | 68.1mm → 67.1mm |
35 |
| 2005 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
50 |
Expert Buying Guide for 2014 MAZDA CX-5
For your 2014 Mazda CX-5, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 67.1mm; if larger, use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 50mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree) to match the wheel's lug seat. Improper lug nuts can lead to wheel loosening. Verify that the wheel's load rating meets or exceeds the vehicle's requirements for safe operation.
Historical Fitment Data Reference
In our dataset, MAZDA CX-5 appears from 2013 to 2025 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and stress on wheel studs.
- ✅ Check brake caliper clearance when fitting wheels with lower offset or larger diameter; the 2014 CX-5 has tight tolerances.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
2014 MAZDA CX-5 — Frequently Asked Questions
What is the bolt pattern for a 2014 MAZDA CX-5?
The 2014 MAZDA CX-5 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA CX-5 have the same bolt pattern as the 2014?
The MAZDA CX-5 uses the 5x114.3 pattern from 2013 through 2025. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Will wheels from another MAZDA fit my 2014 CX-5?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I use spacers on my 2014 MAZDA CX-5?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What lug nut size does the 2014 MAZDA CX-5 use?
The 2014 MAZDA CX-5 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 50mm offset mean for the 2014 CX-5?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →