2011 MAZDA MAZDA2 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 MAZDA MAZDA2, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 MAZDA2 — Year-Specific Fitment Context
The 2011 model year marks the beginning of the MAZDA MAZDA2's 4x100 bolt pattern era, which continued through 2014 (4 consecutive years). Wheels from any 2011–2014 MAZDA MAZDA2 are cross-compatible with the 2011 model.
MAZDA MAZDA2 Bolt Pattern by Year
The table below shows how the MAZDA2's wheel specifications have changed over the years. The 2011 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2011 MAZDA MAZDA2
For your 2011 Mazda2, the 4x100 bolt pattern is shared with 2011-2014 models. The critical center bore is 54.1mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stick to 45mm ±5mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree taper). Mixing seat types (e.g., ball seat) can cause wheel loosening. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, MAZDA MAZDA2 appears from 2011 to 2014 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and damage.
- ✅ Check inner clearance for aftermarket wheels; the 2011 Mazda2 has tight rear strut clearance.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 MAZDA MAZDA2 — Frequently Asked Questions
What is the bolt pattern for a 2011 MAZDA MAZDA2?
The 2011 MAZDA MAZDA2 uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 45mm.
What other years of MAZDA MAZDA2 have the same bolt pattern as the 2011?
The MAZDA MAZDA2 uses the 4x100 pattern from 2011 through 2014. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the PCD for a 2011 MAZDA MAZDA2?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 MAZDA2, the PCD is 4x100.
What lug nut size does the 2011 MAZDA MAZDA2 use?
The 2011 MAZDA MAZDA2 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2011 MAZDA MAZDA2?
The OEM offset for the 2011 MAZDA2 is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another MAZDA fit my 2011 MAZDA2?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 54.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset