2013 MAZDA MAZDA2 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 MAZDA MAZDA2, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 MAZDA2 — Year-Specific Fitment Context
The 2013 MAZDA MAZDA2 is in year 3 of 4 using the 4x100 pattern (2011–2014). Wheels from any 2011–2014 MAZDA MAZDA2 are cross-compatible with the 2013 model.
MAZDA MAZDA2 Bolt Pattern by Year
The table below shows how the MAZDA2's wheel specifications have changed over the years. The 2013 model year is highlighted.
Fitment Notes
The 2013 MAZDA MAZDA2 has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, MAZDA MAZDA2 appears from 2011 to 2014 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
2013 MAZDA MAZDA2 — Frequently Asked Questions
What is the bolt pattern for a 2013 MAZDA MAZDA2?
The 2013 MAZDA MAZDA2 uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 45mm.
What other years of MAZDA MAZDA2 have the same bolt pattern as the 2013?
The MAZDA MAZDA2 uses the 4x100 pattern from 2011 through 2014. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Do 2013 MAZDA MAZDA2s use lug bolts or lug nuts?
The 2013 MAZDA2 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2013 MAZDA?
The 2013 MAZDA2 uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another MAZDA fit my 2013 MAZDA2?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 54.1mm.
What is the center bore of a 2013 MAZDA MAZDA2?
The factory center bore (hub bore) for the 2013 MAZDA MAZDA2 is 54.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
MAZDA MAZDA2 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2011-2014 (4 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2013 MAZDA MAZDA2, please report it via our About page contact so we can verify and update this record.