2014 MAZDA MAZDA2 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 MAZDA MAZDA2, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2014 MAZDA2 — Year-Specific Fitment Context
The 2014 model year is the final year of the MAZDA MAZDA2's 4x100 bolt pattern run (since 2011). Wheels from any 2011–2014 MAZDA MAZDA2 are cross-compatible with the 2014 model.
MAZDA MAZDA2 Bolt Pattern by Year
The table below shows how the MAZDA2's wheel specifications have changed over the years. The 2014 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2014 MAZDA MAZDA2
For your 2014 Mazda2, the 4x100 bolt pattern is shared with 2011-2014 models. The 54.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration. Offset is sensitive; stock is 45mm, but 38-48mm works. Exceeding this risks rubbing or poor handling. Use only 12x1.50 lug nuts with correct seat type (cone or ball) matching the wheel. Improper seating can cause wheel loss. Always torque to spec.
Historical Fitment Data Reference
In our dataset, MAZDA MAZDA2 appears from 2011 to 2014 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 38mm to prevent fender rubbing.
- ✅ Verify aftermarket wheels include hub-centric rings for 54.1mm bore.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 MAZDA MAZDA2 — Frequently Asked Questions
What is the bolt pattern for a 2014 MAZDA MAZDA2?
The 2014 MAZDA MAZDA2 uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 45mm.
What other years of MAZDA MAZDA2 have the same bolt pattern as the 2014?
The MAZDA MAZDA2 uses the 4x100 pattern from 2011 through 2014. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the PCD for a 2014 MAZDA MAZDA2?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 MAZDA2, the PCD is 4x100.
Can I put aftermarket wheels on my 2014 MAZDA MAZDA2?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 45mm, and a center bore of at least 54.1mm (using hub rings if larger).
What is the factory wheel offset for a 2014 MAZDA MAZDA2?
The OEM offset for the 2014 MAZDA2 is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2014 MAZDA?
The 2014 MAZDA2 uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset