2001 Mercedes-Benz M-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Mercedes-Benz M-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2001 M-Class — Year-Specific Fitment Context
The 2001 Mercedes-Benz M-Class is in year 4 of 18 using the 5x112 pattern (1998–2015). Wheels from any 1998–2015 Mercedes-Benz M-Class are cross-compatible with the 2001 model.
Mercedes-Benz M-Class Bolt Pattern by Year
The table below shows how the M-Class's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x112 | 66.6 | 60 |
| 1999 | 5x112 | 66.6 | 60 |
| 2000 | 5x112 | 66.6 | 60 |
| ▸ 2001 | 5x112 | 66.6 | 60 |
| 2002 | 5x112 | 66.6 | 60 |
| 2003 | 5x112 | 66.6 | 60 |
| 2004 | 5x112 | 66.6 | 60 |
| 2005 | 5x112 | 66.6 | 60 |
| 2006 | 5x112 | 66.6 | 60 |
| 2007 | 5x112 | 66.6 | 55 |
| 2008 | 5x112 | 66.6 | 55 |
| 2009 | 5x112 | 66.6 | 55 |
| 2010 | 5x112 | 66.6 | 55 |
| 2011 | 5x112 | 66.6 | 55 |
| 2012 | 5x112 | 66.6 | 55 |
| 2013 | 5x112 | 66.6 | 55 |
| 2014 | 5x112 | 66.6 | 55 |
| 2015 | 5x112 | 66.6 | 55 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2001 Mercedes-Benz M-Class
For your 2001 Mercedes-Benz M-Class, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 60mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: B 14x1.50 thread pitch with a ball seat (Mercedes-specific). Conical or flat-seat nuts can damage the wheel. Re-torque after 50 miles of driving. Avoid wheels with offset below 55mm or above 65mm without verification.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz M-Class appears from 1998 to 2015 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 110 Nm (81 lb-ft) after 50 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 66.6mm center bore.
- ✅ Verify wheel clearance with the brake calipers and suspension components, especially with lower offsets.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Mercedes-Benz M-Class — Frequently Asked Questions
What is the bolt pattern for a 2001 Mercedes-Benz M-Class?
The 2001 Mercedes-Benz M-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 60mm.
What other years of Mercedes-Benz M-Class have the same bolt pattern as the 2001?
The Mercedes-Benz M-Class uses the 5x112 pattern from 1998 through 2015. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Will wheels from another Mercedes-Benz fit my 2001 M-Class?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Do 2001 Mercedes-Benz M-Classs use lug bolts or lug nuts?
The 2001 M-Class requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2001 Mercedes-Benz M-Class?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 M-Class, the PCD is 5x112.
What is the center bore of a 2001 Mercedes-Benz M-Class?
The factory center bore (hub bore) for the 2001 Mercedes-Benz M-Class is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset