2010 Mercedes-Benz M-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Mercedes-Benz M-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 55 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 M-Class — Year-Specific Fitment Context
The 2010 Mercedes-Benz M-Class is in year 13 of 18 using the 5x112 pattern (1998–2015). Wheels from any 1998–2015 Mercedes-Benz M-Class are cross-compatible with the 2010 model.
Mercedes-Benz M-Class Bolt Pattern by Year
The table below shows how the M-Class's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x112 | 66.6 | 60 |
| 1999 | 5x112 | 66.6 | 60 |
| 2000 | 5x112 | 66.6 | 60 |
| 2001 | 5x112 | 66.6 | 60 |
| 2002 | 5x112 | 66.6 | 60 |
| 2003 | 5x112 | 66.6 | 60 |
| 2004 | 5x112 | 66.6 | 60 |
| 2005 | 5x112 | 66.6 | 60 |
| 2006 | 5x112 | 66.6 | 60 |
| 2007 | 5x112 | 66.6 | 55 |
| 2008 | 5x112 | 66.6 | 55 |
| 2009 | 5x112 | 66.6 | 55 |
| ▸ 2010 | 5x112 | 66.6 | 55 |
| 2011 | 5x112 | 66.6 | 55 |
| 2012 | 5x112 | 66.6 | 55 |
| 2013 | 5x112 | 66.6 | 55 |
| 2014 | 5x112 | 66.6 | 55 |
| 2015 | 5x112 | 66.6 | 55 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2010 Mercedes-Benz M-Class
For your 2010 Mercedes-Benz M-Class, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The OEM offset is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: use 14x1.50 thread pitch with ball seat (OEM) or cone seat (aftermarket). Mixing seat types can lead to loose wheels. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz M-Class appears from 1998 to 2015 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 66.6mm.
- ✅ Stick to offsets between 50-60mm to avoid rubbing on suspension or fenders.
- ✅ Re-torque lug nuts to 110-130 Nm after 50 miles of driving.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Mercedes-Benz M-Class — Frequently Asked Questions
What is the bolt pattern for a 2010 Mercedes-Benz M-Class?
The 2010 Mercedes-Benz M-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 55mm.
What other years of Mercedes-Benz M-Class have the same bolt pattern as the 2010?
The Mercedes-Benz M-Class uses the 5x112 pattern from 1998 through 2015. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the factory wheel offset for a 2010 Mercedes-Benz M-Class?
The OEM offset for the 2010 M-Class is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 55mm offset mean for the 2010 M-Class?
An offset of 55mm means the wheel's mounting surface is 55mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
Will wheels from another Mercedes-Benz fit my 2010 M-Class?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Can I use spacers on my 2010 Mercedes-Benz M-Class?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset