1993 Mercury Capri Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Mercury Capri, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 59.6 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1993 Capri — Year-Specific Fitment Context
The 1993 Mercury Capri is in year 2 of 3 using the 4x114.3 pattern (1992–1994). Wheels from any 1992–1994 Mercury Capri are cross-compatible with the 1993 model.
Mercury Capri Bolt Pattern by Year
The table below shows how the Capri's wheel specifications have changed over the years. The 1993 model year is highlighted.
Fitment Notes
The 1993 Mercury Capri has a bolt pattern of 4x114.3.
This means it is a 4 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Mercury Capri appears from 1992 to 1994 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
1993 Mercury Capri — Frequently Asked Questions
What is the bolt pattern for a 1993 Mercury Capri?
The 1993 Mercury Capri uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 59.6mm and the offset is 35-45mmmm.
What other years of Mercury Capri have the same bolt pattern as the 1993?
The Mercury Capri uses the 4x114.3 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
Do 1993 Mercury Capris use lug bolts or lug nuts?
The 1993 Capri requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 1993 Mercury?
The 1993 Capri uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 59.6mm center bore important for the 1993 Capri?
The 59.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 1993 Mercury Capri?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 Capri, the PCD is 4x114.3.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Mercury Capri is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1994 (3 model years).
- Observed bolt-pattern variants: 1 (4x114.3).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1993 Mercury Capri, please report it via our About page contact so we can verify and update this record.