1994 Mercury Capri Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Mercury Capri, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 59.6 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 Capri — Year-Specific Fitment Context
The 1994 model year is the final year of the Mercury Capri's 4x114.3 bolt pattern run (since 1992). Wheels from any 1992–1994 Mercury Capri are cross-compatible with the 1994 model.
Mercury Capri Bolt Pattern by Year
The table below shows how the Capri's wheel specifications have changed over the years. The 1994 model year is highlighted.
Fitment Notes
The 1994 Mercury Capri has a bolt pattern of 4x114.3.
This means it is a 4 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Mercury Capri appears from 1992 to 1994 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
1994 Mercury Capri — Frequently Asked Questions
What is the bolt pattern for a 1994 Mercury Capri?
The 1994 Mercury Capri uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 59.6mm and the offset is 35-45mmmm.
What other years of Mercury Capri have the same bolt pattern as the 1994?
The Mercury Capri uses the 4x114.3 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1994 Mercury Capri?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 59.6mm (using hub rings if larger).
Will wheels from another Mercury fit my 1994 Capri?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 59.6mm.
What does 35-45mmmm offset mean for the 1994 Capri?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercury.
How do I measure the bolt pattern on my 1994 Mercury?
The 1994 Capri uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Mercury Capri is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1994 (3 model years).
- Observed bolt-pattern variants: 1 (4x114.3).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1994 Mercury Capri, please report it via our About page contact so we can verify and update this record.