2007 Mercury Mountaineer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Mercury Mountaineer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 44 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2007 Mountaineer — Year-Specific Fitment Context
The 2007 Mercury Mountaineer is in year 11 of 14 using the 5x114.3 pattern (1997–2010). Wheels from any 1997–2010 Mercury Mountaineer are cross-compatible with the 2007 model.
Mercury Mountaineer Bolt Pattern by Year
The table below shows how the Mountaineer's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x114.3 | 70.5 | 44 |
| 1998 | 5x114.3 | 70.5 | 44 |
| 1999 | 5x114.3 | 70.5 | 44 |
| 2000 | 5x114.3 | 70.5 | 44 |
| 2001 | 5x114.3 | 70.5 | 44 |
| 2002 | 5x114.3 | 70.5 | 44 |
| 2003 | 5x114.3 | 70.5 | 44 |
| 2004 | 5x114.3 | 70.5 | 44 |
| 2005 | 5x114.3 | 70.5 | 44 |
| 2006 | 5x114.3 | 70.5 | 44 |
| ▸ 2007 | 5x114.3 | 70.5 | 44 |
| 2008 | 5x114.3 | 70.5 | 44 |
| 2009 | 5x114.3 | 70.5 | 44 |
| 2010 | 5x114.3 | 70.5 | 44 |
Fitment Notes
The 2007 Mercury Mountaineer has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Mercury Mountaineer appears from 1997 to 2010 (14 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2007 Mercury Mountaineer — Frequently Asked Questions
What is the bolt pattern for a 2007 Mercury Mountaineer?
The 2007 Mercury Mountaineer uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 44mm.
What other years of Mercury Mountaineer have the same bolt pattern as the 2007?
The Mercury Mountaineer uses the 5x114.3 pattern from 1997 through 2010. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2007 Mercury?
The 2007 Mountaineer uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2007 Mercury Mountaineer use?
The 2007 Mercury Mountaineer uses 1/2 20 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2007 Mercury Mountaineer?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 44mm, and a center bore of at least 70.5mm (using hub rings if larger).
Do 2007 Mercury Mountaineers use lug bolts or lug nuts?
The 2007 Mountaineer requires 1/2 20 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Mercury Mountaineer is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1997-2010 (14 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 Mercury Mountaineer, please report it via our About page contact so we can verify and update this record.