2014 Mitsubishi i-MiEV Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Mitsubishi i-MiEV, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2014 i-MiEV — Year-Specific Fitment Context
The 2014 Mitsubishi i-MiEV is in year 3 of 6 using the 4x100 pattern (2012–2017). Wheels from any 2012–2017 Mitsubishi i-MiEV are cross-compatible with the 2014 model.
Mitsubishi i-MiEV Bolt Pattern by Year
The table below shows how the i-MiEV's wheel specifications have changed over the years. The 2014 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2014 Mitsubishi i-MiEV
The 2014 Mitsubishi i-MiEV uses a 4x100 bolt pattern with a 56.1mm center bore and 35mm offset. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) or ball seat lugs as specified. Improper lug nuts can lead to wheel loosening. For safety, re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mitsubishi i-MiEV appears from 2012 to 2017 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 30mm or above 40mm to prevent rubbing on suspension or fenders.
- ✅ Check that aftermarket wheels have a center bore of at least 56.1mm; use hub-centric rings if larger.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Mitsubishi i-MiEV — Frequently Asked Questions
What is the bolt pattern for a 2014 Mitsubishi i-MiEV?
The 2014 Mitsubishi i-MiEV uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35mm.
What other years of Mitsubishi i-MiEV have the same bolt pattern as the 2014?
The Mitsubishi i-MiEV uses the 4x100 pattern from 2012 through 2017. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the factory wheel offset for a 2014 Mitsubishi i-MiEV?
The OEM offset for the 2014 i-MiEV is typically around 35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2014 Mitsubishi i-MiEV?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2014 Mitsubishi i-MiEV?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 i-MiEV, the PCD is 4x100.
Will wheels from another Mitsubishi fit my 2014 i-MiEV?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset