2016 Mitsubishi i-MiEV Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Mitsubishi i-MiEV, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2016 i-MiEV — Year-Specific Fitment Context
The 2016 Mitsubishi i-MiEV is in year 5 of 6 using the 4x100 pattern (2012–2017). Wheels from any 2012–2017 Mitsubishi i-MiEV are cross-compatible with the 2016 model.
Mitsubishi i-MiEV Bolt Pattern by Year
The table below shows how the i-MiEV's wheel specifications have changed over the years. The 2016 model year is highlighted.
Fitment Notes
The 2016 Mitsubishi i-MiEV has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Mitsubishi i-MiEV appears from 2012 to 2017 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
2016 Mitsubishi i-MiEV — Frequently Asked Questions
What is the bolt pattern for a 2016 Mitsubishi i-MiEV?
The 2016 Mitsubishi i-MiEV uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35mm.
What other years of Mitsubishi i-MiEV have the same bolt pattern as the 2016?
The Mitsubishi i-MiEV uses the 4x100 pattern from 2012 through 2017. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What is the center bore of a 2016 Mitsubishi i-MiEV?
The factory center bore (hub bore) for the 2016 Mitsubishi i-MiEV is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 56.1mm center bore important for the 2016 i-MiEV?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2016 Mitsubishi i-MiEV?
The OEM offset for the 2016 i-MiEV is typically around 35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2016 Mitsubishi?
The 2016 i-MiEV uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Mitsubishi i-MiEV is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2012-2017 (4 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2016 Mitsubishi i-MiEV, please report it via our About page contact so we can verify and update this record.