2011 Mitsubishi Outlander Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Mitsubishi Outlander, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 Outlander — Year-Specific Fitment Context
The 2011 Mitsubishi Outlander is in year 9 of 22 using the 5x114.3 pattern (2003–2024). Wheels from any 2003–2024 Mitsubishi Outlander are cross-compatible with the 2011 model.
Mitsubishi Outlander Bolt Pattern by Year
The table below shows how the Outlander's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 38 |
| 2010 | 5x114.3 | 67.1 | 38 |
| ▸ 2011 | 5x114.3 | 67.1 | 38 |
| 2012 | 5x114.3 | 67.1 | 38 |
| 2013 | 5x114.3 | 67.1 | 38 |
| 2014 | 5x114.3 | 67.1 | 38 |
| 2015 | 5x114.3 | 67.1 | 38 |
| 2016 | 5x114.3 | 67.1 | 38 |
| 2017 | 5x114.3 | 67.1 | 38 |
| 2018 | 5x114.3 | 67.1 | 38 |
| 2019 | 5x114.3 | 67.1 | 38-46 |
| 2020 | 5x114.3 | 67.1 | 38-46 |
| 2022 | 5x114.3 | 67.1 | 38-46 |
| 2023 | 5x114.3 | 67.1 | 38-46 |
| 2024 | 5x114.3 | 67.1 | 38-46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Mitsubishi Outlander
For your 2011 Mitsubishi Outlander, the bolt pattern is 5x114.3, but the center bore is a critical 67.1mm. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 38mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can cause wheel loosening or damage. Verify that aftermarket wheels clear brake calipers and suspension components.
Historical Fitment Data Reference
In our dataset, Mitsubishi Outlander appears from 2003 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations and stress on studs can occur.
- ✅ Check that aftermarket wheels have sufficient clearance for the Outlander's brake calipers, especially if upgrading to larger brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Mitsubishi Outlander — Frequently Asked Questions
What is the bolt pattern for a 2011 Mitsubishi Outlander?
The 2011 Mitsubishi Outlander uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38mm.
What other years of Mitsubishi Outlander have the same bolt pattern as the 2011?
The Mitsubishi Outlander uses the 5x114.3 pattern from 2003 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Do 2011 Mitsubishi Outlanders use lug bolts or lug nuts?
The 2011 Outlander requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2011 Mitsubishi Outlander use?
The 2011 Mitsubishi Outlander uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Mitsubishi fit my 2011 Outlander?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Why is matching the 67.1mm center bore important for the 2011 Outlander?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset