2024 Mitsubishi Outlander Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Mitsubishi Outlander, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Outlander — Year-Specific Fitment Context
The 2024 model year is the final year of the Mitsubishi Outlander's 5x114.3 bolt pattern run (since 2003). Wheels from any 2003–2024 Mitsubishi Outlander are cross-compatible with the 2024 model.
Mitsubishi Outlander Bolt Pattern by Year
The table below shows how the Outlander's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 38 |
| 2010 | 5x114.3 | 67.1 | 38 |
| 2011 | 5x114.3 | 67.1 | 38 |
| 2012 | 5x114.3 | 67.1 | 38 |
| 2013 | 5x114.3 | 67.1 | 38 |
| 2014 | 5x114.3 | 67.1 | 38 |
| 2015 | 5x114.3 | 67.1 | 38 |
| 2016 | 5x114.3 | 67.1 | 38 |
| 2017 | 5x114.3 | 67.1 | 38 |
| 2018 | 5x114.3 | 67.1 | 38 |
| 2019 | 5x114.3 | 67.1 | 38-46 |
| 2020 | 5x114.3 | 67.1 | 38-46 |
| 2022 | 5x114.3 | 67.1 | 38-46 |
| 2023 | 5x114.3 | 67.1 | 38-46 |
| ▸ 2024 | 5x114.3 | 67.1 | 38-46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Mitsubishi Outlander
For the 2024 Mitsubishi Outlander, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels require hub-centric rings to prevent vibrations. Offset must stay within 38-46mm to avoid rubbing or suspension interference. Always use 12x1.5 lug nuts with the correct seat type (conical or ball seat) matching the wheel. Improper seating can cause wheel loss. This is the final year for this bolt pattern; wheels from 2003-2024 Outlanders are compatible.
Historical Fitment Data Reference
In our dataset, Mitsubishi Outlander appears from 2003 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Verify wheel bore is 67.1mm or use hub-centric rings; hub-centric wheels are preferred.
- ✅ Check offset carefully: lower offset (38mm) pushes wheels outward, higher (46mm) inward; test fit if possible.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Mitsubishi Outlander — Frequently Asked Questions
What is the bolt pattern for a 2024 Mitsubishi Outlander?
The 2024 Mitsubishi Outlander uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Outlander have the same bolt pattern as the 2024?
The Mitsubishi Outlander uses the 5x114.3 pattern from 2003 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Do 2024 Mitsubishi Outlanders use lug bolts or lug nuts?
The 2024 Outlander requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2024 Mitsubishi Outlander?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the PCD for a 2024 Mitsubishi Outlander?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Outlander, the PCD is 5x114.3.
What is the factory wheel offset for a 2024 Mitsubishi Outlander?
The OEM offset for the 2024 Outlander is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset