2012 Mitsubishi Outlander Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Mitsubishi Outlander, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2012 Outlander — Year-Specific Fitment Context
The 2012 Mitsubishi Outlander is in year 10 of 22 using the 5x114.3 pattern (2003–2024). Wheels from any 2003–2024 Mitsubishi Outlander are cross-compatible with the 2012 model.
Mitsubishi Outlander Bolt Pattern by Year
The table below shows how the Outlander's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 38 |
| 2010 | 5x114.3 | 67.1 | 38 |
| 2011 | 5x114.3 | 67.1 | 38 |
| ▸ 2012 | 5x114.3 | 67.1 | 38 |
| 2013 | 5x114.3 | 67.1 | 38 |
| 2014 | 5x114.3 | 67.1 | 38 |
| 2015 | 5x114.3 | 67.1 | 38 |
| 2016 | 5x114.3 | 67.1 | 38 |
| 2017 | 5x114.3 | 67.1 | 38 |
| 2018 | 5x114.3 | 67.1 | 38 |
| 2019 | 5x114.3 | 67.1 | 38-46 |
| 2020 | 5x114.3 | 67.1 | 38-46 |
| 2022 | 5x114.3 | 67.1 | 38-46 |
| 2023 | 5x114.3 | 67.1 | 38-46 |
| 2024 | 5x114.3 | 67.1 | 38-46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2012 Mitsubishi Outlander
For your 2012 Mitsubishi Outlander, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibration and ensure proper load transfer. The factory offset is 38mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a conical (60-degree) seat, while aftermarket wheels may require ball or tapered seats. Mismatched lug nuts can cause wheel detachment. Verify lug nut compatibility and torque to spec.
Historical Fitment Data Reference
In our dataset, Mitsubishi Outlander appears from 2003 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel shake.
- ✅ Check that aftermarket wheels clear the brake calipers, as some designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Mitsubishi Outlander — Frequently Asked Questions
What is the bolt pattern for a 2012 Mitsubishi Outlander?
The 2012 Mitsubishi Outlander uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38mm.
What other years of Mitsubishi Outlander have the same bolt pattern as the 2012?
The Mitsubishi Outlander uses the 5x114.3 pattern from 2003 through 2024. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What is the factory wheel offset for a 2012 Mitsubishi Outlander?
The OEM offset for the 2012 Outlander is typically around 38mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2012 Mitsubishi Outlander?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the PCD for a 2012 Mitsubishi Outlander?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 Outlander, the PCD is 5x114.3.
How do I measure the bolt pattern on my 2012 Mitsubishi?
The 2012 Outlander uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset