2010 Mitsubishi Outlander Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Mitsubishi Outlander, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 Outlander — Year-Specific Fitment Context
The 2010 Mitsubishi Outlander is in year 8 of 22 using the 5x114.3 pattern (2003–2024). Wheels from any 2003–2024 Mitsubishi Outlander are cross-compatible with the 2010 model.
Mitsubishi Outlander Bolt Pattern by Year
The table below shows how the Outlander's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 38 |
| ▸ 2010 | 5x114.3 | 67.1 | 38 |
| 2011 | 5x114.3 | 67.1 | 38 |
| 2012 | 5x114.3 | 67.1 | 38 |
| 2013 | 5x114.3 | 67.1 | 38 |
| 2014 | 5x114.3 | 67.1 | 38 |
| 2015 | 5x114.3 | 67.1 | 38 |
| 2016 | 5x114.3 | 67.1 | 38 |
| 2017 | 5x114.3 | 67.1 | 38 |
| 2018 | 5x114.3 | 67.1 | 38 |
| 2019 | 5x114.3 | 67.1 | 38-46 |
| 2020 | 5x114.3 | 67.1 | 38-46 |
| 2022 | 5x114.3 | 67.1 | 38-46 |
| 2023 | 5x114.3 | 67.1 | 38-46 |
| 2024 | 5x114.3 | 67.1 | 38-46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 Mitsubishi Outlander
For your 2010 Mitsubishi Outlander, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (67.1mm ID to wheel bore OD) are mandatory to prevent vibrations and ensure proper load transfer. The factory offset is 38mm; deviations beyond ±5mm risk rubbing on struts or fenders. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use conical (60-degree) seats, while aftermarket may require ball or shank-style. Improper lug nut engagement can lead to wheel loss. Verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Mitsubishi Outlander appears from 2003 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lb after 50 miles of driving to account for settling.
- ✅ Avoid wheels with offset below 33mm (too aggressive) or above 43mm (too tucked) to prevent clearance issues.
- ✅ Check that aftermarket wheels have a center bore larger than 67.1mm; if so, use hub-centric rings to match the vehicle's hub diameter.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Mitsubishi Outlander — Frequently Asked Questions
What is the bolt pattern for a 2010 Mitsubishi Outlander?
The 2010 Mitsubishi Outlander uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38mm.
What other years of Mitsubishi Outlander have the same bolt pattern as the 2010?
The Mitsubishi Outlander uses the 5x114.3 pattern from 2003 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the PCD for a 2010 Mitsubishi Outlander?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Outlander, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2010 Mitsubishi Outlander?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 38mm, and a center bore of at least 67.1mm (using hub rings if larger).
What lug nut size does the 2010 Mitsubishi Outlander use?
The 2010 Mitsubishi Outlander uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2010 Mitsubishi Outlander?
The factory center bore (hub bore) for the 2010 Mitsubishi Outlander is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset