1995 Nissan 300ZX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Nissan 300ZX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 300ZX — Year-Specific Fitment Context
The 1995 Nissan 300ZX is in year 4 of 5 using the 5x114.3 pattern (1992–1996). Wheels from any 1992–1996 Nissan 300ZX are cross-compatible with the 1995 model.
Nissan 300ZX Bolt Pattern by Year
The table below shows how the 300ZX's wheel specifications have changed over the years. The 1995 model year is highlighted.
Fitment Notes
The 1995 Nissan 300ZX has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Nissan 300ZX appears from 1992 to 1996 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
1995 Nissan 300ZX — Frequently Asked Questions
What is the bolt pattern for a 1995 Nissan 300ZX?
The 1995 Nissan 300ZX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan 300ZX have the same bolt pattern as the 1995?
The Nissan 300ZX uses the 5x114.3 pattern from 1992 through 1996. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1995 Nissan 300ZX?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 30mm, and a center bore of at least 66.1mm (using hub rings if larger).
Do 1995 Nissan 300ZXs use lug bolts or lug nuts?
The 1995 300ZX requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 66.1mm center bore important for the 1995 300ZX?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 1995 Nissan?
The 1995 300ZX uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Nissan 300ZX is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1996 (5 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1995 Nissan 300ZX, please report it via our About page contact so we can verify and update this record.