2011 Nissan 370Z Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Nissan 370Z, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 370Z — Year-Specific Fitment Context
The 2011 Nissan 370Z is in year 3 of 12 using the 5x114.3 pattern (2009–2020). Wheels from any 2009–2020 Nissan 370Z are cross-compatible with the 2011 model.
Nissan 370Z Bolt Pattern by Year
The table below shows how the 370Z's wheel specifications have changed over the years. The 2011 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Nissan 370Z
The 2011 Nissan 370Z uses a 5x114.3 bolt pattern with a 66.1mm center bore. When selecting aftermarket wheels, ensure hub-centric rings are used to match the 66.1mm bore, preventing vibrations and load stress. Offset is critical; the factory 46mm offset maintains proper suspension geometry and brake clearance. Deviating significantly (e.g., below 30mm or above 55mm) may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (cone or ball seat, depending on wheel design). Improper lug nut seating can lead to wheel loosening. Verify all specifications before installation.
Historical Fitment Data Reference
In our dataset, Nissan 370Z appears from 2009 to 2020 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on wheel studs.
- ✅ Check brake caliper clearance when using wheels with lower offset or larger diameter; some aftermarket wheels may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Nissan 370Z — Frequently Asked Questions
What is the bolt pattern for a 2011 Nissan 370Z?
The 2011 Nissan 370Z uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 46mm.
What other years of Nissan 370Z have the same bolt pattern as the 2011?
The Nissan 370Z uses the 5x114.3 pattern from 2009 through 2020. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the center bore of a 2011 Nissan 370Z?
The factory center bore (hub bore) for the 2011 Nissan 370Z is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2011 Nissan 370Z use?
The 2011 Nissan 370Z uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2011 Nissan 370Z?
The OEM offset for the 2011 370Z is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2011 Nissan 370Z?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 370Z, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset