2018 Nissan 370Z Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Nissan 370Z, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 370Z — Year-Specific Fitment Context
The 2018 Nissan 370Z is in year 10 of 12 using the 5x114.3 pattern (2009–2020). Wheels from any 2009–2020 Nissan 370Z are cross-compatible with the 2018 model.
Nissan 370Z Bolt Pattern by Year
The table below shows how the 370Z's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Nissan 370Z
For your 2018 Nissan 370Z, the correct bolt pattern is 5x114.3, center bore 66.1mm, and offset around 46mm. When selecting aftermarket wheels, ensure hub-centric rings are used to match the 66.1mm bore; otherwise, vibrations may occur. Offset is critical: staying within ±5mm of 46mm is recommended to avoid rubbing or clearance issues with the brake calipers and suspension. Always use lug nuts with the correct thread pitch (12x1.25) and proper seat type—factory wheels use a conical (60-degree) seat, while aftermarket wheels may require ball or conical seats. Never mix seat types; improper lug nut engagement can lead to wheel loss. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan 370Z appears from 2009 to 2020 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on wheel studs.
- ✅ Check brake caliper clearance when using wheels with offset below 40mm or above 50mm, as the 370Z has large front calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Nissan 370Z — Frequently Asked Questions
What is the bolt pattern for a 2018 Nissan 370Z?
The 2018 Nissan 370Z uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 46mm.
What other years of Nissan 370Z have the same bolt pattern as the 2018?
The Nissan 370Z uses the 5x114.3 pattern from 2009 through 2020. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Why is matching the 66.1mm center bore important for the 2018 370Z?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2018 Nissan 370Z?
The OEM offset for the 2018 370Z is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2018 Nissan 370Zs use lug bolts or lug nuts?
The 2018 370Z requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 46mm offset mean for the 2018 370Z?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset