2015 Nissan 370Z Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Nissan 370Z, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2015 370Z — Year-Specific Fitment Context
The 2015 Nissan 370Z is in year 7 of 12 using the 5x114.3 pattern (2009–2020). Wheels from any 2009–2020 Nissan 370Z are cross-compatible with the 2015 model.
Nissan 370Z Bolt Pattern by Year
The table below shows how the 370Z's wheel specifications have changed over the years. The 2015 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2015 Nissan 370Z
For your 2015 Nissan 370Z, the bolt pattern is 5x114.3 with a critical center bore of 66.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues with brakes and suspension. Always verify lug nut compatibility: the 370Z uses M12x1.25 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts (e.g., ball seat) can lead to wheel loosening. For aftermarket wheels, confirm that the lug seat matches the wheel's design. Proper torque is 80-90 ft-lbs. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan 370Z appears from 2009 to 2020 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving, especially with new wheels.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 66.1mm center bore.
- ✅ Avoid wheels with offset below 40mm or above 50mm to prevent rubbing on fenders or brake calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Nissan 370Z — Frequently Asked Questions
What is the bolt pattern for a 2015 Nissan 370Z?
The 2015 Nissan 370Z uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 46mm.
What other years of Nissan 370Z have the same bolt pattern as the 2015?
The Nissan 370Z uses the 5x114.3 pattern from 2009 through 2020. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
Why is matching the 66.1mm center bore important for the 2015 370Z?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2015 Nissan 370Z use?
The 2015 Nissan 370Z uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2015 Nissan 370Z?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2015 Nissan 370Z?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset