2019 Nissan 370Z Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Nissan 370Z, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 370Z — Year-Specific Fitment Context
The 2019 Nissan 370Z is in year 11 of 12 using the 5x114.3 pattern (2009–2020). Wheels from any 2009–2020 Nissan 370Z are cross-compatible with the 2019 model.
Nissan 370Z Bolt Pattern by Year
The table below shows how the 370Z's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Nissan 370Z
For your 2019 Nissan 370Z, the bolt pattern is 5x114.3mm with a critical center bore of 66.1mm. Aftermarket wheels often have a larger bore; always use hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 35-45mm to avoid rubbing or clearance issues with the strut and fender. Use only 12x1.25 lug nuts with the correct seat type—conical (60-degree) or ball seat—matching your wheel's design. Never mix seat types; improper seating can cause wheel loss. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan 370Z appears from 2009 to 2020 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving, then periodically check.
- ✅ If using aftermarket wheels, verify hub bore and use hub-centric rings if bore >66.1mm to avoid vibrations.
- ✅ Check offset carefully; aggressive offsets near 35mm may require fender rolling on lowered cars.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Nissan 370Z — Frequently Asked Questions
What is the bolt pattern for a 2019 Nissan 370Z?
The 2019 Nissan 370Z uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
What other years of Nissan 370Z have the same bolt pattern as the 2019?
The Nissan 370Z uses the 5x114.3 pattern from 2009 through 2020. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2019 Nissan 370Z?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 66.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2019 Nissan?
The 2019 370Z uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2019 Nissan 370Z?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
How tight should I torque the lug nuts on a 2019 Nissan 370Z?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset