2026 Nissan Z Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Nissan Z is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 20-35mm, and utilizes M12x1.25 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Nissan Z Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 20-35mm |
| Thread Size (Lug Nut / Bolt) | M12x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Z — Year-Specific Fitment Context
The 2026 model year is the final year of the Nissan Z's 5x114.3 bolt pattern run (since 2023). Wheels from any 2023–2026 Nissan Z are cross-compatible with the 2026 model.
Nissan Z Bolt Pattern by Year
Looking for all generations? View the complete Nissan Z (2023–2026) Bolt Pattern & Generation Guide →
The table below shows how the Z's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Nissan Z Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Nissan Z, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2008 Hyundai Santa Fe | 66.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2016 Hyundai Tucson | 66.1 mm (Exact) | 51 | N 12x1.50 (Cone) |
| 2015 INFINITI Q40 | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2024 INFINITI Q50 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2022 INFINITI Q60 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2019 INFINITI Q70 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Hyundai Santa Cruz | 67.1 mm | 67.1mm → 66.1mm |
35-45 |
| 2024 Hyundai Santa Fe Hybrid | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2023 Hyundai Santa Fe Plug-in Hybrid | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2018 Hyundai Santa Fe Sport | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2019 Hyundai Santa Fe XL | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2006 Hyundai Sonata | 67.1 mm | 67.1mm → 66.1mm |
46 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Nissan Z — Frequently Asked Questions
What is the bolt pattern for a 2026 Nissan Z?
The 2026 Nissan Z uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 20-35mmmm.
What other years of Nissan Z have the same bolt pattern as the 2026?
The Nissan Z uses the 5x114.3 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Do 2026 Nissan Zs use lug bolts or lug nuts?
The 2026 Z requires M12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2026 Nissan Z?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 20-35mmmm, and a center bore of at least 66.1mm (using hub rings if larger).
What is the center bore of a 2026 Nissan Z?
The factory center bore (hub bore) for the 2026 Nissan Z is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 20-35mmmm offset mean for the 2026 Z?
An offset of 20-35mmmm means the wheel's mounting surface is 20-35mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →