2024 Nissan Z Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Nissan Z, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 20-35mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Z — Year-Specific Fitment Context
The 2024 model year is the final year of the Nissan Z's 5x114.3 bolt pattern run (since 2023). Wheels from any 2023–2024 Nissan Z are cross-compatible with the 2024 model.
Nissan Z Bolt Pattern by Year
The table below shows how the Z's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2023 | 5x114.3 | 66.1 | 20-35mm |
| ▸ 2024 | 5x114.3 | 66.1 | 20-35mm |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Nissan Z
For the 2024 Nissan Z, the 5x114.3 bolt pattern and 66.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is 20-35mm; staying within this range avoids rubbing or clearance issues with brakes and suspension. Always use M12x1.25 lug nuts with the correct seat type (conical/60-degree for most aftermarket wheels, ball seat for OEM). Incorrect lug nuts can cause wheel loosening or damage. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Nissan Z appears from 2023 to 2024 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 55.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Use hub-centric rings if aftermarket wheels have a larger bore; plastic rings are fine for street use, aluminum for track.
- ✅ Check brake caliper clearance with the inner barrel of the wheel; some 20mm offset wheels may require spacers for big brake kits.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Nissan Z — Frequently Asked Questions
What is the bolt pattern for a 2024 Nissan Z?
The 2024 Nissan Z uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 20-35mmmm.
What other years of Nissan Z have the same bolt pattern as the 2024?
The Nissan Z uses the 5x114.3 pattern from 2023 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the center bore of a 2024 Nissan Z?
The factory center bore (hub bore) for the 2024 Nissan Z is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2024 Nissan?
The 2024 Z uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2024 Nissan Z?
Refer to your owner's manual for exact specs, but always tighten the M12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2024 Nissan Z?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your M12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset