2001 Oldsmobile Aurora Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Oldsmobile Aurora, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 Aurora — Year-Specific Fitment Context
The 2001 Oldsmobile Aurora is in year 7 of 9 using the 5x115 pattern (1995–2003). Wheels from any 1995–2003 Oldsmobile Aurora are cross-compatible with the 2001 model.
Oldsmobile Aurora Bolt Pattern by Year
The table below shows how the Aurora's wheel specifications have changed over the years. The 2001 model year is highlighted.
Fitment Notes
The 2001 Oldsmobile Aurora has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Oldsmobile Aurora appears from 1995 to 2003 (8 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2001 Oldsmobile Aurora — Frequently Asked Questions
What is the bolt pattern for a 2001 Oldsmobile Aurora?
The 2001 Oldsmobile Aurora uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 42mm.
What other years of Oldsmobile Aurora have the same bolt pattern as the 2001?
The Oldsmobile Aurora uses the 5x115 pattern from 1995 through 2003. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Will wheels from another Oldsmobile fit my 2001 Aurora?
Only if they share the exact same 5x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
Can I put aftermarket wheels on my 2001 Oldsmobile Aurora?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 42mm, and a center bore of at least 70.3mm (using hub rings if larger).
What is the center bore of a 2001 Oldsmobile Aurora?
The factory center bore (hub bore) for the 2001 Oldsmobile Aurora is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2001 Oldsmobile Aurora use?
The 2001 Oldsmobile Aurora uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Oldsmobile Aurora is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1995-2003 (8 model years).
- Observed bolt-pattern variants: 1 (5x115).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2001 Oldsmobile Aurora, please report it via our About page contact so we can verify and update this record.