2000 Oldsmobile Intrigue Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Oldsmobile Intrigue, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 Intrigue — Year-Specific Fitment Context
The 2000 Oldsmobile Intrigue is in year 3 of 5 using the 5x115 pattern (1998–2002). Wheels from any 1998–2002 Oldsmobile Intrigue are cross-compatible with the 2000 model.
Oldsmobile Intrigue Bolt Pattern by Year
The table below shows how the Intrigue's wheel specifications have changed over the years. The 2000 model year is highlighted.
Fitment Notes
The 2000 Oldsmobile Intrigue has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Oldsmobile Intrigue appears from 1998 to 2002 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2000 Oldsmobile Intrigue — Frequently Asked Questions
What is the bolt pattern for a 2000 Oldsmobile Intrigue?
The 2000 Oldsmobile Intrigue uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 42mm.
What other years of Oldsmobile Intrigue have the same bolt pattern as the 2000?
The Oldsmobile Intrigue uses the 5x115 pattern from 1998 through 2002. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2000 Oldsmobile Intrigue?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 42mm, and a center bore of at least 70.3mm (using hub rings if larger).
How do I measure the bolt pattern on my 2000 Oldsmobile?
The 2000 Intrigue uses a 5x115 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2000 Oldsmobile Intrigue?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Intrigue, the PCD is 5x115.
What lug nut size does the 2000 Oldsmobile Intrigue use?
The 2000 Oldsmobile Intrigue uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Oldsmobile Intrigue is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1998-2002 (5 model years).
- Observed bolt-pattern variants: 1 (5x115).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2000 Oldsmobile Intrigue, please report it via our About page contact so we can verify and update this record.