1993 Plymouth Colt Vista Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Plymouth Colt Vista, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1993 Colt Vista — Year-Specific Fitment Context
The 1993 Plymouth Colt Vista is in year 2 of 3 using the 4x114.3 pattern (1992–1994). Wheels from any 1992–1994 Plymouth Colt Vista are cross-compatible with the 1993 model.
Plymouth Colt Vista Bolt Pattern by Year
The table below shows how the Colt Vista's wheel specifications have changed over the years. The 1993 model year is highlighted.
Fitment Notes
The 1993 Plymouth Colt Vista has a bolt pattern of 4x114.3.
This means it is a 4 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Plymouth Colt Vista appears from 1992 to 1994 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
1993 Plymouth Colt Vista — Frequently Asked Questions
What is the bolt pattern for a 1993 Plymouth Colt Vista?
The 1993 Plymouth Colt Vista uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mmmm.
What other years of Plymouth Colt Vista have the same bolt pattern as the 1993?
The Plymouth Colt Vista uses the 4x114.3 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What is the factory wheel offset for a 1993 Plymouth Colt Vista?
The OEM offset for the 1993 Colt Vista is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 1993 Plymouth Colt Vista?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the PCD for a 1993 Plymouth Colt Vista?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 Colt Vista, the PCD is 4x114.3.
Can I use spacers on my 1993 Plymouth Colt Vista?
Yes, but ensure the wheel spacers match the 4x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Plymouth Colt Vista is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1994 (3 model years).
- Observed bolt-pattern variants: 1 (4x114.3).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1993 Plymouth Colt Vista, please report it via our About page contact so we can verify and update this record.