1994 Plymouth Colt Vista Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Plymouth Colt Vista, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 Colt Vista — Year-Specific Fitment Context
The 1994 model year is the final year of the Plymouth Colt Vista's 4x114.3 bolt pattern run (since 1992). Wheels from any 1992–1994 Plymouth Colt Vista are cross-compatible with the 1994 model.
Plymouth Colt Vista Bolt Pattern by Year
The table below shows how the Colt Vista's wheel specifications have changed over the years. The 1994 model year is highlighted.
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1994 Plymouth Colt Vista
When selecting aftermarket wheels for your 1994 Plymouth Colt Vista, the 67.1mm center bore is critical. Most aftermarket wheels have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is tight at 35-45mm; straying outside this can cause rubbing or clearance issues. Always use M12x1.5 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat, while aftermarket may require ball or conical seats. Never mix seat types. Verify that the wheel's load rating meets or exceeds the vehicle's requirements. Proper fitment ensures safety and performance.
Historical Fitment Data Reference
In our dataset, Plymouth Colt Vista appears from 1992 to 1994 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to prevent loosening due to wheel settling.
- ✅ Avoid using universal fitment wheels without hub-centric rings; they can cause vibrations and stress on wheel studs.
- ✅ Check for brake caliper clearance, especially with 15-inch or larger wheels, as the Colt Vista has limited space.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Plymouth Colt Vista — Frequently Asked Questions
What is the bolt pattern for a 1994 Plymouth Colt Vista?
The 1994 Plymouth Colt Vista uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mmmm.
What other years of Plymouth Colt Vista have the same bolt pattern as the 1994?
The Plymouth Colt Vista uses the 4x114.3 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
Do 1994 Plymouth Colt Vistas use lug bolts or lug nuts?
The 1994 Colt Vista requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 1994 Plymouth Colt Vista?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 67.1mm center bore important for the 1994 Colt Vista?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 1994 Plymouth Colt Vista?
Yes, but ensure the wheel spacers match the 4x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset