2007 Subaru B9 Tribeca Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Subaru B9 Tribeca, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 B9 Tribeca — Year-Specific Fitment Context
The 2007 model year is the final year of the Subaru B9 Tribeca's 5x114.3 bolt pattern run (since 2006). Wheels from any 2006–2007 Subaru B9 Tribeca are cross-compatible with the 2007 model.
Subaru B9 Tribeca Bolt Pattern by Year
The table below shows how the B9 Tribeca's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 56.1 | 55 |
| ▸ 2007 | 5x114.3 | 56.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 Subaru B9 Tribeca
For your 2007 Subaru B9 Tribeca, the 5x114.3 bolt pattern is shared with many Subaru models, but the 56.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory wheels use a conical (60-degree) seat. Avoid ball-seat lug nuts as they can loosen. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Subaru B9 Tribeca appears from 2006 to 2007 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 56.1mm bore.
- ✅ Verify offset stays within 50-60mm to avoid rubbing on suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Subaru B9 Tribeca — Frequently Asked Questions
What is the bolt pattern for a 2007 Subaru B9 Tribeca?
The 2007 Subaru B9 Tribeca uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 55mm.
What other years of Subaru B9 Tribeca have the same bolt pattern as the 2007?
The Subaru B9 Tribeca uses the 5x114.3 pattern from 2006 through 2007. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What lug nut size does the 2007 Subaru B9 Tribeca use?
The 2007 Subaru B9 Tribeca uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2007 Subaru B9 Tribecas use lug bolts or lug nuts?
The 2007 B9 Tribeca requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Subaru fit my 2007 B9 Tribeca?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.1mm.
What is the center bore of a 2007 Subaru B9 Tribeca?
The factory center bore (hub bore) for the 2007 Subaru B9 Tribeca is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset