2013 Subaru Tribeca Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Subaru Tribeca, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 Tribeca — Year-Specific Fitment Context
The 2013 Subaru Tribeca is in year 6 of 7 using the 5x114.3 pattern (2008–2014). Wheels from any 2008–2014 Subaru Tribeca are cross-compatible with the 2013 model.
Subaru Tribeca Bolt Pattern by Year
The table below shows how the Tribeca's wheel specifications have changed over the years. The 2013 model year is highlighted.
Fitment Notes
The 2013 Subaru Tribeca has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Subaru Tribeca appears from 2008 to 2014 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2013 Subaru Tribeca — Frequently Asked Questions
What is the bolt pattern for a 2013 Subaru Tribeca?
The 2013 Subaru Tribeca uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 55mm.
What other years of Subaru Tribeca have the same bolt pattern as the 2013?
The Subaru Tribeca uses the 5x114.3 pattern from 2008 through 2014. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What does 55mm offset mean for the 2013 Tribeca?
An offset of 55mm means the wheel's mounting surface is 55mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Subaru.
Can I put aftermarket wheels on my 2013 Subaru Tribeca?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 55mm, and a center bore of at least 56.1mm (using hub rings if larger).
What is the PCD for a 2013 Subaru Tribeca?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 Tribeca, the PCD is 5x114.3.
What is the factory wheel offset for a 2013 Subaru Tribeca?
The OEM offset for the 2013 Tribeca is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Subaru Tribeca is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2008-2014 (7 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2013 Subaru Tribeca, please report it via our About page contact so we can verify and update this record.