2013 Toyota FJ Cruiser Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Toyota FJ Cruiser, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 18 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2013 FJ Cruiser — Year-Specific Fitment Context
The 2013 Toyota FJ Cruiser is in year 7 of 8 using the 6x139.7 pattern (2007–2014). Wheels from any 2007–2014 Toyota FJ Cruiser are cross-compatible with the 2013 model.
Toyota FJ Cruiser Bolt Pattern by Year
The table below shows how the FJ Cruiser's wheel specifications have changed over the years. The 2013 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2013 Toyota FJ Cruiser
For your 2013 Toyota FJ Cruiser, the 6x139.7 bolt pattern is shared across 2007–2014 models, ensuring cross-compatibility. However, the 106.1mm center bore is critical: aftermarket wheels often have a larger bore (e.g., 108mm), requiring hub-centric rings to prevent vibrations and ensure proper load distribution. Offset is sensitive; the factory 18mm offset maintains suspension geometry and brake clearance. Deviating more than ±10mm may cause rubbing or handling issues. Always use the correct lug nuts: 12x1.50 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen or damage the wheel. Re-torque after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota FJ Cruiser appears from 2007 to 2014 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85–95 ft-lbs after 50–100 miles to account for wheel settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Verify brake caliper clearance when changing offset; some aftermarket wheels may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Toyota FJ Cruiser — Frequently Asked Questions
What is the bolt pattern for a 2013 Toyota FJ Cruiser?
The 2013 Toyota FJ Cruiser uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 18mm.
What other years of Toyota FJ Cruiser have the same bolt pattern as the 2013?
The Toyota FJ Cruiser uses the 6x139.7 pattern from 2007 through 2014. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What lug nut size does the 2013 Toyota FJ Cruiser use?
The 2013 Toyota FJ Cruiser uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 106.1mm center bore important for the 2013 FJ Cruiser?
The 106.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2013 Toyota FJ Cruiser?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 106.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What does 18mm offset mean for the 2013 FJ Cruiser?
An offset of 18mm means the wheel's mounting surface is 18mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset