2024 Toyota Highlander Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Toyota Highlander, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Highlander — Year-Specific Fitment Context
The 2024 model year is the final year of the Toyota Highlander's 5x114.3 bolt pattern run (since 2001). Wheels from any 2001–2024 Toyota Highlander are cross-compatible with the 2024 model.
Toyota Highlander Bolt Pattern by Year
The table below shows how the Highlander's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 60.1 | 35 |
| 2002 | 5x114.3 | 60.1 | 35 |
| 2003 | 5x114.3 | 60.1 | 35 |
| 2004 | 5x114.3 | 60.1 | 35 |
| 2005 | 5x114.3 | 60.1 | 35 |
| 2006 | 5x114.3 | 60.1 | 35 |
| 2007 | 5x114.3 | 60.1 | 35 |
| 2008 | 5x114.3 | 60.1 | 35 |
| 2009 | 5x114.3 | 60.1 | 35 |
| 2010 | 5x114.3 | 60.1 | 35 |
| 2011 | 5x114.3 | 60.1 | 35 |
| 2012 | 5x114.3 | 60.1 | 35 |
| 2013 | 5x114.3 | 60.1 | 35 |
| 2014 | 5x114.3 | 60.1 | 35 |
| 2015 | 5x114.3 | 60.1 | 35 |
| 2016 | 5x114.3 | 60.1 | 35 |
| 2017 | 5x114.3 | 60.1 | 35 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| ▸ 2024 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Toyota Highlander
For the 2024 Toyota Highlander, the correct bolt pattern is 5x114.3, but the center bore is critical: 60.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 35-45mm; deviating can cause rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat, while aftermarket may require ball or tapered seats. Mismatched lug nuts can lead to wheel loosening. Verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Toyota Highlander appears from 2001 to 2024 (24 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 60.1mm bore is specific.
- ✅ Check brake caliper clearance when using wheels with offset near 35mm, as some aftermarket designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Toyota Highlander — Frequently Asked Questions
What is the bolt pattern for a 2024 Toyota Highlander?
The 2024 Toyota Highlander uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Highlander have the same bolt pattern as the 2024?
The Toyota Highlander uses the 5x114.3 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Do 2024 Toyota Highlanders use lug bolts or lug nuts?
The 2024 Highlander requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2024 Toyota?
The 2024 Highlander uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 35-45mm offset mean for the 2024 Highlander?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Can I put aftermarket wheels on my 2024 Toyota Highlander?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset