2011 Toyota Highlander Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Toyota Highlander, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 Highlander — Year-Specific Fitment Context
The 2011 Toyota Highlander is in year 11 of 24 using the 5x114.3 pattern (2001–2024). Wheels from any 2001–2024 Toyota Highlander are cross-compatible with the 2011 model.
Toyota Highlander Bolt Pattern by Year
The table below shows how the Highlander's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 60.1 | 35 |
| 2002 | 5x114.3 | 60.1 | 35 |
| 2003 | 5x114.3 | 60.1 | 35 |
| 2004 | 5x114.3 | 60.1 | 35 |
| 2005 | 5x114.3 | 60.1 | 35 |
| 2006 | 5x114.3 | 60.1 | 35 |
| 2007 | 5x114.3 | 60.1 | 35 |
| 2008 | 5x114.3 | 60.1 | 35 |
| 2009 | 5x114.3 | 60.1 | 35 |
| 2010 | 5x114.3 | 60.1 | 35 |
| ▸ 2011 | 5x114.3 | 60.1 | 35 |
| 2012 | 5x114.3 | 60.1 | 35 |
| 2013 | 5x114.3 | 60.1 | 35 |
| 2014 | 5x114.3 | 60.1 | 35 |
| 2015 | 5x114.3 | 60.1 | 35 |
| 2016 | 5x114.3 | 60.1 | 35 |
| 2017 | 5x114.3 | 60.1 | 35 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Toyota Highlander
For your 2011 Toyota Highlander, the critical fitment specs are a 5x114.3 bolt pattern, 60.1mm center bore, and 35mm offset. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: staying within ±5mm of 35mm avoids rubbing or clearance issues with suspension and brake components. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use conical (60-degree) seats; aftermarket wheels may require ball-seat or shank-style nuts. Improper lug nuts can cause wheel loosening or damage. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Highlander appears from 2001 to 2024 (24 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify that hub-centric rings are installed to match the 60.1mm center bore.
- ✅ Avoid wheels with offset below 30mm or above 40mm to prevent rubbing or brake clearance issues.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Toyota Highlander — Frequently Asked Questions
What is the bolt pattern for a 2011 Toyota Highlander?
The 2011 Toyota Highlander uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35mm.
What other years of Toyota Highlander have the same bolt pattern as the 2011?
The Toyota Highlander uses the 5x114.3 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What does 35mm offset mean for the 2011 Highlander?
An offset of 35mm means the wheel's mounting surface is 35mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
What is the factory wheel offset for a 2011 Toyota Highlander?
The OEM offset for the 2011 Highlander is typically around 35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 60.1mm center bore important for the 2011 Highlander?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Toyota fit my 2011 Highlander?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset