2025 Toyota Highlander Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Toyota Highlander is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).
2025 Toyota Highlander Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 76 ft-lbs (103 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Highlander — Year-Specific Fitment Context
The 2025 Toyota Highlander is in year 25 of 26 using the 5x114.3 pattern (2001–2026). Wheels from any 2001–2026 Toyota Highlander are cross-compatible with the 2025 model.
Toyota Highlander Bolt Pattern by Year
Looking for all generations? View the complete Toyota Highlander (2001–2026) Bolt Pattern & Generation Guide →
The table below shows how the Highlander's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 60.1 | 35 |
| 2002 | 5x114.3 | 60.1 | 35 |
| 2003 | 5x114.3 | 60.1 | 35 |
| 2004 | 5x114.3 | 60.1 | 35 |
| 2005 | 5x114.3 | 60.1 | 35 |
| 2006 | 5x114.3 | 60.1 | 35 |
| 2007 | 5x114.3 | 60.1 | 35 |
| 2008 | 5x114.3 | 60.1 | 35 |
| 2009 | 5x114.3 | 60.1 | 35 |
| 2010 | 5x114.3 | 60.1 | 35 |
| 2011 | 5x114.3 | 60.1 | 35 |
| 2012 | 5x114.3 | 60.1 | 35 |
| 2013 | 5x114.3 | 60.1 | 35 |
| 2014 | 5x114.3 | 60.1 | 35 |
| 2015 | 5x114.3 | 60.1 | 35 |
| 2016 | 5x114.3 | 60.1 | 35 |
| 2017 | 5x114.3 | 60.1 | 35 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
| ▸ 2025 | 5x114.3 | 60.1 | 35-45 |
| 2026 | 5x114.3 | 60.1 | 35-45 |
2025 Toyota Highlander Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Toyota Highlander, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lexus ES | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2020 Lexus GS | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat/Mag) |
| 2007 Lexus GX | 60.1 mm (Exact) | 25 | N 12x1.50 (Flat/Mag) |
| 2025 Lexus IS | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Lexus NX | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2025 Lexus RC | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2016 Kia Sedona | 67.1 mm | 67.1mm → 60.1mm |
46 |
| 2025 Kia Seltos | 67.1 mm | 67.1mm → 60.1mm |
45-50 |
| 2011 Kia Sorento | 67.1 mm | 67.1mm → 60.1mm |
46 |
| 2025 Kia Sorento Hybrid | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2025 Kia Sorento Plug-in Hybrid | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2025 Kia Soul | 67.1 mm | 67.1mm → 60.1mm |
45-50 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Toyota Highlander — Frequently Asked Questions
What is the bolt pattern for a 2025 Toyota Highlander?
The 2025 Toyota Highlander uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Highlander have the same bolt pattern as the 2025?
The Toyota Highlander uses the 5x114.3 pattern from 2001 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 Toyota Highlanders use lug bolts or lug nuts?
The 2025 Highlander requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2025 Toyota Highlander?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How do I measure the bolt pattern on my 2025 Toyota?
The 2025 Highlander uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2025 Toyota Highlander?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →