2021 Toyota Highlander Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Toyota Highlander, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2021 Highlander — Year-Specific Fitment Context
The 2021 Toyota Highlander is in year 21 of 24 using the 5x114.3 pattern (2001–2024). Wheels from any 2001–2024 Toyota Highlander are cross-compatible with the 2021 model.
Toyota Highlander Bolt Pattern by Year
The table below shows how the Highlander's wheel specifications have changed over the years. The 2021 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 60.1 | 35 |
| 2002 | 5x114.3 | 60.1 | 35 |
| 2003 | 5x114.3 | 60.1 | 35 |
| 2004 | 5x114.3 | 60.1 | 35 |
| 2005 | 5x114.3 | 60.1 | 35 |
| 2006 | 5x114.3 | 60.1 | 35 |
| 2007 | 5x114.3 | 60.1 | 35 |
| 2008 | 5x114.3 | 60.1 | 35 |
| 2009 | 5x114.3 | 60.1 | 35 |
| 2010 | 5x114.3 | 60.1 | 35 |
| 2011 | 5x114.3 | 60.1 | 35 |
| 2012 | 5x114.3 | 60.1 | 35 |
| 2013 | 5x114.3 | 60.1 | 35 |
| 2014 | 5x114.3 | 60.1 | 35 |
| 2015 | 5x114.3 | 60.1 | 35 |
| 2016 | 5x114.3 | 60.1 | 35 |
| 2017 | 5x114.3 | 60.1 | 35 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| ▸ 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2021 Toyota Highlander
For the 2021 Toyota Highlander, the correct bolt pattern is 5x114.3 with a center bore of 60.1mm. When selecting aftermarket wheels, always use hub-centric rings to ensure the wheel is centered on the hub, preventing vibrations and stress on lug studs. The recommended offset range is 35-45mm; deviating outside this range can cause clearance issues with suspension or brake components and may affect handling. Lug nuts must be 12x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat or shank-style lug nuts, as they can loosen or damage the wheel. Always torque lug nuts to manufacturer specifications (around 76 ft-lbs) and re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Highlander appears from 2001 to 2024 (24 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 60.1mm without hub-centric rings; vibration and stud failure can occur.
- ✅ Check for brake caliper clearance when using wheels with offset near 35mm, as some aftermarket calipers may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Toyota Highlander — Frequently Asked Questions
What is the bolt pattern for a 2021 Toyota Highlander?
The 2021 Toyota Highlander uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Highlander have the same bolt pattern as the 2021?
The Toyota Highlander uses the 5x114.3 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2021 Toyota?
The 2021 Highlander uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Toyota fit my 2021 Highlander?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
Can I use spacers on my 2021 Toyota Highlander?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Do 2021 Toyota Highlanders use lug bolts or lug nuts?
The 2021 Highlander requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset