1992 Toyota MR2 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Toyota MR2, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 MR2 — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Toyota MR2's 5x114.3 bolt pattern era, which continued through 2000 (9 consecutive years). Wheels from any 1992–2000 Toyota MR2 are cross-compatible with the 1992 model. Across its full production run (1992–2005), the MR2 has also used: 4x100.
Toyota MR2 Bolt Pattern by Year
The table below shows how the MR2's wheel specifications have changed over the years. The 1992 model year is highlighted.
Fitment Notes
The 1992 Toyota MR2 has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota MR2 appears from 1992 to 2005 (10 model years).
Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
1992 Toyota MR2 — Frequently Asked Questions
What is the bolt pattern for a 1992 Toyota MR2?
The 1992 Toyota MR2 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 46mm.
What other years of Toyota MR2 have the same bolt pattern as the 1992?
The Toyota MR2 uses the 5x114.3 pattern from 1992 through 2000. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1992 Toyota?
The 1992 MR2 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 60.1mm center bore important for the 1992 MR2?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 1992 Toyota MR2?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1992 MR2, the PCD is 5x114.3.
What is the factory wheel offset for a 1992 Toyota MR2?
The OEM offset for the 1992 MR2 is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Toyota MR2 has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2005 (10 model years).
- Observed bolt-pattern variants: 2 (4x100, 5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1992 Toyota MR2, please report it via our About page contact so we can verify and update this record.