2004 Toyota MR2 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Toyota MR2, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2004 MR2 — Year-Specific Fitment Context
The 2004 Toyota MR2 is in year 4 of 5 using the 4x100 pattern (2001–2005). Wheels from any 2001–2005 Toyota MR2 are cross-compatible with the 2004 model. Across its full production run (1992–2005), the MR2 has also used: 5x114.3.
Toyota MR2 Bolt Pattern by Year
The table below shows how the MR2's wheel specifications have changed over the years. The 2004 model year is highlighted.
Fitment Notes
The 2004 Toyota MR2 has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota MR2 appears from 1992 to 2005 (10 model years).
Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
2004 Toyota MR2 — Frequently Asked Questions
What is the bolt pattern for a 2004 Toyota MR2?
The 2004 Toyota MR2 uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 46mm.
What other years of Toyota MR2 have the same bolt pattern as the 2004?
The Toyota MR2 uses the 4x100 pattern from 2001 through 2005. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
Do 2004 Toyota MR2s use lug bolts or lug nuts?
The 2004 MR2 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2004 Toyota?
The 2004 MR2 uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2004 Toyota MR2?
The factory center bore (hub bore) for the 2004 Toyota MR2 is 54.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2004 Toyota MR2?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 46mm, and a center bore of at least 54.1mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Toyota MR2 has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2005 (10 model years).
- Observed bolt-pattern variants: 2 (4x100, 5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2004 Toyota MR2, please report it via our About page contact so we can verify and update this record.