1994 Toyota Paseo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Toyota Paseo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 Paseo — Year-Specific Fitment Context
The 1994 Toyota Paseo is in year 3 of 6 using the 4x100 pattern (1992–1997). Wheels from any 1992–1997 Toyota Paseo are cross-compatible with the 1994 model.
Toyota Paseo Bolt Pattern by Year
The table below shows how the Paseo's wheel specifications have changed over the years. The 1994 model year is highlighted.
Fitment Notes
The 1994 Toyota Paseo has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Paseo appears from 1992 to 1997 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
1994 Toyota Paseo — Frequently Asked Questions
What is the bolt pattern for a 1994 Toyota Paseo?
The 1994 Toyota Paseo uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 35-45mmmm.
What other years of Toyota Paseo have the same bolt pattern as the 1994?
The Toyota Paseo uses the 4x100 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
What is the factory wheel offset for a 1994 Toyota Paseo?
The OEM offset for the 1994 Paseo is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 35-45mmmm offset mean for the 1994 Paseo?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Can I put aftermarket wheels on my 1994 Toyota Paseo?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 54.1mm (using hub rings if larger).
What is the PCD for a 1994 Toyota Paseo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1994 Paseo, the PCD is 4x100.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Toyota Paseo is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1997 (6 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1994 Toyota Paseo, please report it via our About page contact so we can verify and update this record.