1996 Toyota Paseo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Toyota Paseo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1996 Paseo — Year-Specific Fitment Context
The 1996 Toyota Paseo is in year 5 of 6 using the 4x100 pattern (1992–1997). Wheels from any 1992–1997 Toyota Paseo are cross-compatible with the 1996 model.
Toyota Paseo Bolt Pattern by Year
The table below shows how the Paseo's wheel specifications have changed over the years. The 1996 model year is highlighted.
Fitment Notes
The 1996 Toyota Paseo has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Paseo appears from 1992 to 1997 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
1996 Toyota Paseo — Frequently Asked Questions
What is the bolt pattern for a 1996 Toyota Paseo?
The 1996 Toyota Paseo uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 35-45mmmm.
What other years of Toyota Paseo have the same bolt pattern as the 1996?
The Toyota Paseo uses the 4x100 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1996 Toyota Paseo?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 1996 Toyota Paseo use?
The 1996 Toyota Paseo uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 1996 Toyota Paseos use lug bolts or lug nuts?
The 1996 Paseo requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Toyota fit my 1996 Paseo?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 54.1mm.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Toyota Paseo is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1997 (6 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1996 Toyota Paseo, please report it via our About page contact so we can verify and update this record.