1998 Toyota Supra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Toyota Supra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1998 Supra — Year-Specific Fitment Context
The 1998 model year is the final year of the Toyota Supra's 5x114.3 bolt pattern run (since 1992). Wheels from any 1992–1998 Toyota Supra are cross-compatible with the 1998 model.
Toyota Supra Bolt Pattern by Year
The table below shows how the Supra's wheel specifications have changed over the years. The 1998 model year is highlighted.
Fitment Notes
The 1998 Toyota Supra has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Supra appears from 1992 to 1998 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 13.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
1998 Toyota Supra — Frequently Asked Questions
What is the bolt pattern for a 1998 Toyota Supra?
The 1998 Toyota Supra uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 50mm.
What other years of Toyota Supra have the same bolt pattern as the 1998?
The Toyota Supra uses the 5x114.3 pattern from 1992 through 1998. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1998 Toyota Supra?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 50mm, and a center bore of at least 60.1mm (using hub rings if larger).
What is the factory wheel offset for a 1998 Toyota Supra?
The OEM offset for the 1998 Supra is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 1998 Toyota Supras use lug bolts or lug nuts?
The 1998 Supra requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Toyota fit my 1998 Supra?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Toyota Supra is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1998 (7 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 13.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1998 Toyota Supra, please report it via our About page contact so we can verify and update this record.