2013 Toyota Tacoma Access Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Toyota Tacoma Access Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 25-30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2013 Tacoma Access Cab — Year-Specific Fitment Context
The 2013 Toyota Tacoma Access Cab is in year 9 of 19 using the 6x139.7 pattern (2005–2023). Wheels from any 2005–2023 Toyota Tacoma Access Cab are cross-compatible with the 2013 model.
Toyota Tacoma Access Cab Bolt Pattern by Year
The table below shows how the Tacoma Access Cab's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| 2011 | 6x139.7 | 106.1 | 25-30 |
| 2012 | 6x139.7 | 106.1 | 25-30 |
| ▸ 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
| 2015 | 6x139.7 | 106.1 | 25-30 |
| 2016 | 6x139.7 | 106.1 | 25-30 |
| 2017 | 6x139.7 | 106.1 | 25-30 |
| 2018 | 6x139.7 | 106.1 | 25-30 |
| 2019 | 6x139.7 | 106.1 | 25-30 |
| 2020 | 6x139.7 | 106.1 | 25-30 |
| 2021 | 6x139.7 | 106.1 | 25-30 |
| 2022 | 6x139.7 | 106.1 | 25-30 |
| 2023 | 6x139.7 | 106.1 | 25-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2013 Toyota Tacoma Access Cab
For your 2013 Toyota Tacoma Access Cab, the 6x139.7 bolt pattern and 106.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is tight: 25-30mm. Straying outside this can cause rubbing on suspension or fenders, especially with wider tires. Always use lug nuts with the correct 12x1.5 thread pitch and a 60-degree conical seat; ball-seat or acorn-style nuts are unsafe. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Access Cab appears from 2005 to 2023 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 55.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings (plastic or aluminum) for aftermarket wheels to match the 106.1mm bore.
- ✅ Stick to 25-30mm offset; even 20mm may rub on the upper control arm with stock suspension.
- ✅ Re-torque lug nuts to 83 ft-lbs after 50 miles of driving to prevent loosening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Toyota Tacoma Access Cab — Frequently Asked Questions
What is the bolt pattern for a 2013 Toyota Tacoma Access Cab?
The 2013 Toyota Tacoma Access Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 25-30mm.
What other years of Toyota Tacoma Access Cab have the same bolt pattern as the 2013?
The Toyota Tacoma Access Cab uses the 6x139.7 pattern from 2005 through 2023. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Will wheels from another Toyota fit my 2013 Tacoma Access Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 106.1mm.
What does 25-30mm offset mean for the 2013 Tacoma Access Cab?
An offset of 25-30mm means the wheel's mounting surface is 25-30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Can I use spacers on my 2013 Toyota Tacoma Access Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 106.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What lug nut size does the 2013 Toyota Tacoma Access Cab use?
The 2013 Toyota Tacoma Access Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset