2018 Toyota Tacoma Access Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Toyota Tacoma Access Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 25-30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2018 Tacoma Access Cab — Year-Specific Fitment Context
The 2018 Toyota Tacoma Access Cab is in year 14 of 19 using the 6x139.7 pattern (2005–2023). Wheels from any 2005–2023 Toyota Tacoma Access Cab are cross-compatible with the 2018 model.
Toyota Tacoma Access Cab Bolt Pattern by Year
The table below shows how the Tacoma Access Cab's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| 2011 | 6x139.7 | 106.1 | 25-30 |
| 2012 | 6x139.7 | 106.1 | 25-30 |
| 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
| 2015 | 6x139.7 | 106.1 | 25-30 |
| 2016 | 6x139.7 | 106.1 | 25-30 |
| 2017 | 6x139.7 | 106.1 | 25-30 |
| ▸ 2018 | 6x139.7 | 106.1 | 25-30 |
| 2019 | 6x139.7 | 106.1 | 25-30 |
| 2020 | 6x139.7 | 106.1 | 25-30 |
| 2021 | 6x139.7 | 106.1 | 25-30 |
| 2022 | 6x139.7 | 106.1 | 25-30 |
| 2023 | 6x139.7 | 106.1 | 25-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2018 Toyota Tacoma Access Cab
For your 2018 Toyota Tacoma Access Cab, the 6x139.7 bolt pattern and 106.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 25-30mm; deviations can cause rubbing or suspension interference. Always use lug nuts with the correct 12x1.5 thread pitch and a conical (60-degree) or ball seat—mixing seat types risks loosening. Re-torque after 50-100 miles. Wheels from 2005-2023 Tacoma Access Cabs are direct fit.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Access Cab appears from 2005 to 2023 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 55.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (106.1mm to wheel bore) for aftermarket wheels to avoid vibrations.
- ✅ Stick to offset 25-30mm; lower offset may rub fenders, higher may contact suspension.
- ✅ Re-torque lug nuts to 83 ft-lb after 50-100 miles; use a torque wrench, not an impact gun.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Toyota Tacoma Access Cab — Frequently Asked Questions
What is the bolt pattern for a 2018 Toyota Tacoma Access Cab?
The 2018 Toyota Tacoma Access Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 25-30mm.
What other years of Toyota Tacoma Access Cab have the same bolt pattern as the 2018?
The Toyota Tacoma Access Cab uses the 6x139.7 pattern from 2005 through 2023. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Can I use spacers on my 2018 Toyota Tacoma Access Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 106.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the factory wheel offset for a 2018 Toyota Tacoma Access Cab?
The OEM offset for the 2018 Tacoma Access Cab is typically around 25-30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2018 Toyota?
The 2018 Tacoma Access Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2018 Toyota Tacoma Access Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 25-30mm, and a center bore of at least 106.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset