2011 Toyota Tacoma Access Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Toyota Tacoma Access Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 25-30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2011 Tacoma Access Cab — Year-Specific Fitment Context
The 2011 Toyota Tacoma Access Cab is in year 7 of 19 using the 6x139.7 pattern (2005–2023). Wheels from any 2005–2023 Toyota Tacoma Access Cab are cross-compatible with the 2011 model.
Toyota Tacoma Access Cab Bolt Pattern by Year
The table below shows how the Tacoma Access Cab's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| ▸ 2011 | 6x139.7 | 106.1 | 25-30 |
| 2012 | 6x139.7 | 106.1 | 25-30 |
| 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
| 2015 | 6x139.7 | 106.1 | 25-30 |
| 2016 | 6x139.7 | 106.1 | 25-30 |
| 2017 | 6x139.7 | 106.1 | 25-30 |
| 2018 | 6x139.7 | 106.1 | 25-30 |
| 2019 | 6x139.7 | 106.1 | 25-30 |
| 2020 | 6x139.7 | 106.1 | 25-30 |
| 2021 | 6x139.7 | 106.1 | 25-30 |
| 2022 | 6x139.7 | 106.1 | 25-30 |
| 2023 | 6x139.7 | 106.1 | 25-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2011 Toyota Tacoma Access Cab
For your 2011 Toyota Tacoma Access Cab, the 6x139.7 bolt pattern and 106.1mm center bore are critical. Aftermarket wheels often have a larger center bore, so use hub-centric rings to prevent vibrations and ensure proper load distribution. Offset must stay within 25-30mm; deviating can cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct 12x1.5 thread pitch and appropriate seat type (cone or ball seat) to avoid wheel loosening. Verify that aftermarket wheels are load-rated for your Tacoma's weight. Proper fitment ensures safety and performance.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Access Cab appears from 2005 to 2023 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 55.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50 miles of driving to maintain clamping force.
- ✅ Avoid spacers unless hub-centric and vehicle-specific; they can alter offset and stress bearings.
- ✅ Check for caliper clearance with aftermarket wheels, as some designs may interfere with the brake calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Toyota Tacoma Access Cab — Frequently Asked Questions
What is the bolt pattern for a 2011 Toyota Tacoma Access Cab?
The 2011 Toyota Tacoma Access Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 25-30mm.
What other years of Toyota Tacoma Access Cab have the same bolt pattern as the 2011?
The Toyota Tacoma Access Cab uses the 6x139.7 pattern from 2005 through 2023. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the factory wheel offset for a 2011 Toyota Tacoma Access Cab?
The OEM offset for the 2011 Tacoma Access Cab is typically around 25-30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 25-30mm offset mean for the 2011 Tacoma Access Cab?
An offset of 25-30mm means the wheel's mounting surface is 25-30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
How tight should I torque the lug nuts on a 2011 Toyota Tacoma Access Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 106.1mm center bore important for the 2011 Tacoma Access Cab?
The 106.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset