2018 Toyota Tacoma Double Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Toyota Tacoma Double Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 25-30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2018 Tacoma Double Cab — Year-Specific Fitment Context
The 2018 Toyota Tacoma Double Cab is in year 14 of 20 using the 6x139.7 pattern (2005–2024). Wheels from any 2005–2024 Toyota Tacoma Double Cab are cross-compatible with the 2018 model. Across its full production run (2001–2024), the Tacoma Double Cab has also used: 5x114.3.
Toyota Tacoma Double Cab Bolt Pattern by Year
The table below shows how the Tacoma Double Cab's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 60.1 | 40 |
| 2002 | 5x114.3 | 60.1 | 40 |
| 2003 | 5x114.3 | 60.1 | 40 |
| 2004 | 5x114.3 | 60.1 | 40 |
| 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| 2011 | 6x139.7 | 106.1 | 25-30 |
| 2012 | 6x139.7 | 106.1 | 25-30 |
| 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
| 2015 | 6x139.7 | 106.1 | 25-30 |
| 2016 | 6x139.7 | 106.1 | 25-30 |
| 2017 | 6x139.7 | 106.1 | 25-30 |
| ▸ 2018 | 6x139.7 | 106.1 | 25-30 |
| 2019 | 6x139.7 | 106.1 | 25-30 |
| 2020 | 6x139.7 | 106.1 | 25-30 |
| 2021 | 6x139.7 | 106.1 | 25-30 |
| 2022 | 6x139.7 | 106.1 | 25-30 |
| 2024 | 6x139.7 | 106.1 | 25-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2018 Toyota Tacoma Double Cab
For your 2018 Toyota Tacoma Double Cab, the 6x139.7 bolt pattern and 106.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is tight: 25-30mm. Going outside this range can cause rubbing on suspension or fenders, especially with larger tires. Always use lug nuts with the correct 12x1.5 thread pitch and a 60-degree conical seat (common for aftermarket wheels) or the factory ball seat. Never mix seat types. Re-torque after 50-100 miles. Wheels from 2005-2024 Tacoma Double Cabs are direct fit, but verify offset and bore.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Double Cab appears from 2001 to 2024 (23 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if the aftermarket wheel center bore exceeds 106.1mm to avoid vibrations.
- ✅ Stick to 25-30mm offset; even a 20mm offset may cause rubbing with 265/70R17 tires.
- ✅ Re-torque lug nuts to 83 ft-lb after 50-100 miles; use a torque wrench, not an impact gun.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Toyota Tacoma Double Cab — Frequently Asked Questions
What is the bolt pattern for a 2018 Toyota Tacoma Double Cab?
The 2018 Toyota Tacoma Double Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 25-30mm.
What other years of Toyota Tacoma Double Cab have the same bolt pattern as the 2018?
The Toyota Tacoma Double Cab uses the 6x139.7 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Why is matching the 106.1mm center bore important for the 2018 Tacoma Double Cab?
The 106.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2018 Toyota Tacoma Double Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Tacoma Double Cab, the PCD is 6x139.7.
Do 2018 Toyota Tacoma Double Cabs use lug bolts or lug nuts?
The 2018 Tacoma Double Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2018 Toyota Tacoma Double Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset