2012 Toyota Tacoma Double Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Toyota Tacoma Double Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 25-30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2012 Tacoma Double Cab — Year-Specific Fitment Context
The 2012 Toyota Tacoma Double Cab is in year 8 of 20 using the 6x139.7 pattern (2005–2024). Wheels from any 2005–2024 Toyota Tacoma Double Cab are cross-compatible with the 2012 model. Across its full production run (2001–2024), the Tacoma Double Cab has also used: 5x114.3.
Toyota Tacoma Double Cab Bolt Pattern by Year
The table below shows how the Tacoma Double Cab's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 60.1 | 40 |
| 2002 | 5x114.3 | 60.1 | 40 |
| 2003 | 5x114.3 | 60.1 | 40 |
| 2004 | 5x114.3 | 60.1 | 40 |
| 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| 2011 | 6x139.7 | 106.1 | 25-30 |
| ▸ 2012 | 6x139.7 | 106.1 | 25-30 |
| 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
| 2015 | 6x139.7 | 106.1 | 25-30 |
| 2016 | 6x139.7 | 106.1 | 25-30 |
| 2017 | 6x139.7 | 106.1 | 25-30 |
| 2018 | 6x139.7 | 106.1 | 25-30 |
| 2019 | 6x139.7 | 106.1 | 25-30 |
| 2020 | 6x139.7 | 106.1 | 25-30 |
| 2021 | 6x139.7 | 106.1 | 25-30 |
| 2022 | 6x139.7 | 106.1 | 25-30 |
| 2024 | 6x139.7 | 106.1 | 25-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2012 Toyota Tacoma Double Cab
When selecting wheels for your 2012 Toyota Tacoma Double Cab, the center bore must be 106.1mm or larger. If the bore is larger than 106.1mm, hub-centric rings are required to prevent vibrations and ensure proper load distribution. The offset range is critical: 25-30mm is ideal to maintain suspension geometry and avoid rubbing. Offsets outside this range may cause clearance issues with the strut or fender. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either conical (60-degree) or ball seat, matching the wheel's design. Never use the wrong seat type, as it can lead to lug nut loosening or wheel damage.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Double Cab appears from 2001 to 2024 (23 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore smaller than 106.1mm; they will not fit over the hub.
- ✅ Check for caliper clearance when using wheels with offset below 25mm, as they may contact the brake caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Toyota Tacoma Double Cab — Frequently Asked Questions
What is the bolt pattern for a 2012 Toyota Tacoma Double Cab?
The 2012 Toyota Tacoma Double Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 25-30mm.
What other years of Toyota Tacoma Double Cab have the same bolt pattern as the 2012?
The Toyota Tacoma Double Cab uses the 6x139.7 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Do 2012 Toyota Tacoma Double Cabs use lug bolts or lug nuts?
The 2012 Tacoma Double Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2012 Toyota?
The 2012 Tacoma Double Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2012 Toyota Tacoma Double Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 Tacoma Double Cab, the PCD is 6x139.7.
Can I put aftermarket wheels on my 2012 Toyota Tacoma Double Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 25-30mm, and a center bore of at least 106.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset