2015 Toyota Tacoma Double Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Toyota Tacoma Double Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 25-30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2015 Tacoma Double Cab — Year-Specific Fitment Context
The 2015 Toyota Tacoma Double Cab is in year 11 of 20 using the 6x139.7 pattern (2005–2024). Wheels from any 2005–2024 Toyota Tacoma Double Cab are cross-compatible with the 2015 model. Across its full production run (2001–2024), the Tacoma Double Cab has also used: 5x114.3.
Toyota Tacoma Double Cab Bolt Pattern by Year
The table below shows how the Tacoma Double Cab's wheel specifications have changed over the years. The 2015 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 60.1 | 40 |
| 2002 | 5x114.3 | 60.1 | 40 |
| 2003 | 5x114.3 | 60.1 | 40 |
| 2004 | 5x114.3 | 60.1 | 40 |
| 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| 2011 | 6x139.7 | 106.1 | 25-30 |
| 2012 | 6x139.7 | 106.1 | 25-30 |
| 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
| ▸ 2015 | 6x139.7 | 106.1 | 25-30 |
| 2016 | 6x139.7 | 106.1 | 25-30 |
| 2017 | 6x139.7 | 106.1 | 25-30 |
| 2018 | 6x139.7 | 106.1 | 25-30 |
| 2019 | 6x139.7 | 106.1 | 25-30 |
| 2020 | 6x139.7 | 106.1 | 25-30 |
| 2021 | 6x139.7 | 106.1 | 25-30 |
| 2022 | 6x139.7 | 106.1 | 25-30 |
| 2024 | 6x139.7 | 106.1 | 25-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2015 Toyota Tacoma Double Cab
For your 2015 Toyota Tacoma Double Cab, the 6x139.7 bolt pattern and 106.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is tight: 25-30mm. Straying outside this can cause rubbing or premature bearing wear. Always use 12x1.5 lug nuts with the correct seat type—factory is conical (60-degree). Using incorrect seat type (e.g., ball seat) can lead to wheel loosening. Cross-compatible with 2005-2024 Tacoma Double Cab wheels.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Double Cab appears from 2001 to 2024 (23 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50 miles of driving.
- ✅ Avoid wheels with offset below 25mm; they may rub the upper control arm.
- ✅ If using aftermarket wheels, verify hub bore and use hub-centric rings if needed.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Toyota Tacoma Double Cab — Frequently Asked Questions
What is the bolt pattern for a 2015 Toyota Tacoma Double Cab?
The 2015 Toyota Tacoma Double Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 25-30mm.
What other years of Toyota Tacoma Double Cab have the same bolt pattern as the 2015?
The Toyota Tacoma Double Cab uses the 6x139.7 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2015 Toyota Tacoma Double Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2015 Toyota Tacoma Double Cabs use lug bolts or lug nuts?
The 2015 Tacoma Double Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2015 Toyota Tacoma Double Cab?
The OEM offset for the 2015 Tacoma Double Cab is typically around 25-30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2015 Toyota Tacoma Double Cab?
The factory center bore (hub bore) for the 2015 Toyota Tacoma Double Cab is 106.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset