2002 Toyota Tundra Access Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Toyota Tundra Access Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 15 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2002 Tundra Access Cab — Year-Specific Fitment Context
The 2002 Toyota Tundra Access Cab is in year 3 of 7 using the 6x139.7 pattern (2000–2006). Wheels from any 2000–2006 Toyota Tundra Access Cab are cross-compatible with the 2002 model.
Toyota Tundra Access Cab Bolt Pattern by Year
The table below shows how the Tundra Access Cab's wheel specifications have changed over the years. The 2002 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2002 Toyota Tundra Access Cab
For your 2002 Toyota Tundra Access Cab, the bolt pattern is 6x139.7mm with a critical center bore of 106.1mm. Aftermarket wheels often have a larger bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 15mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can cause wheel loosening. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Access Cab appears from 2000 to 2006 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50 miles of mixed driving.
- ✅ Avoid wheels with offset below 10mm or above 20mm to prevent rubbing on control arms or fenders.
- ✅ Verify aftermarket wheels include hub-centric rings; otherwise, purchase 106.1mm ID rings separately.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Toyota Tundra Access Cab — Frequently Asked Questions
What is the bolt pattern for a 2002 Toyota Tundra Access Cab?
The 2002 Toyota Tundra Access Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 15mm.
What other years of Toyota Tundra Access Cab have the same bolt pattern as the 2002?
The Toyota Tundra Access Cab uses the 6x139.7 pattern from 2000 through 2006. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
Can I use spacers on my 2002 Toyota Tundra Access Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 106.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How tight should I torque the lug nuts on a 2002 Toyota Tundra Access Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2002 Toyota Tundra Access Cab?
The OEM offset for the 2002 Tundra Access Cab is typically around 15mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2002 Toyota Tundra Access Cab?
The factory center bore (hub bore) for the 2002 Toyota Tundra Access Cab is 106.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset