2005 Toyota Tundra Access Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2005 Toyota Tundra Access Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 15 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2005 Tundra Access Cab — Year-Specific Fitment Context
The 2005 Toyota Tundra Access Cab is in year 6 of 7 using the 6x139.7 pattern (2000–2006). Wheels from any 2000–2006 Toyota Tundra Access Cab are cross-compatible with the 2005 model.
Toyota Tundra Access Cab Bolt Pattern by Year
The table below shows how the Tundra Access Cab's wheel specifications have changed over the years. The 2005 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2005 Toyota Tundra Access Cab
The 2005 Toyota Tundra Access Cab uses a 6x139.7 bolt pattern with a 106.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The factory offset is 15mm; deviations beyond ±5mm may cause rubbing or suspension interference. Always verify lug nut compatibility: thread pitch is 12x1.5, and the factory uses conical (60-degree) seats. Using incorrect lug nuts (e.g., ball seat) can lead to wheel loosening. For lifted or lowered trucks, offset adjustments may be needed. Cross-compatibility exists with 2000–2006 Tundra models, but always test fit before purchase.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Access Cab appears from 2000 to 2006 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lb after 50 miles of driving, then periodically check.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 106.1mm bore is critical for hub-centric fitment.
- ✅ Check inner clearance for brake calipers and suspension components, especially with offset changes beyond 15mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2005 Toyota Tundra Access Cab — Frequently Asked Questions
What is the bolt pattern for a 2005 Toyota Tundra Access Cab?
The 2005 Toyota Tundra Access Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 15mm.
What other years of Toyota Tundra Access Cab have the same bolt pattern as the 2005?
The Toyota Tundra Access Cab uses the 6x139.7 pattern from 2000 through 2006. Wheels from any of these model years are dimensionally compatible with the 2005, provided the offset and center bore also match.
What does 15mm offset mean for the 2005 Tundra Access Cab?
An offset of 15mm means the wheel's mounting surface is 15mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
What is the factory wheel offset for a 2005 Toyota Tundra Access Cab?
The OEM offset for the 2005 Tundra Access Cab is typically around 15mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Toyota fit my 2005 Tundra Access Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 106.1mm.
How do I measure the bolt pattern on my 2005 Toyota?
The 2005 Tundra Access Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset